A LEADING oil solution for today's high-performance kitchens
RTI's oil management technology offers you a complete end-to-end solution for frying oil management.
Indoor Poly Tank (Standard Capacity)
Specifications:
- Diameter: 28 inches
- Height: 81 inches
- Vessel Material: Food-Grade Polyethylene
- Net Storage Capacity:
- 1400 lbs. fresh oil, 1200 lbs. waste oil
- Tare Weight of Tank:
- 82 lbs. fresh oil tank
- 142 lbs. waste oil tank
Features:
- Certified by NSF to ANSI/NSF Standard 4
- Fresh oil tank provided with level gauge that reads in "Pounds of Oil"
- Overfill protection provided on both tanks
- Waste oil tank is heated
- Space above oil tanks for locating supporting equipment
- Tanks provided with mounting inserts to secure to floor
Indoor Poly Tank (Low Capacity)
Specifications:
- Diameter: 24 inches
- Height: 81 inches
- Vessel Material: Food-Grade Polyethylene
- Net Storage Capacity:
- 1000 lbs. fresh oil, 850 lbs. waste oil
- Tare Weight of Tank:
- 72 lbs. fresh oil tank
- 132 lbs. waste oil tank
Features:
- Certified by NSF to ANSI/NSF Standard 4
- Fresh oil tank provided with level gauge that reads in "Pounds of Oil"
- Overfill protection provided on both tanks
- Waste oil tank is heated
- Space above oil tanks for locating supporting equipment
- Tanks provided with mounting inserts to secure to floor
Filtering System
- Provided for fryers without built-in automatic filtration
- Dependent on fryer system size; filter box sizes range from 50-150 lb. capacity
- Uses filter paper
- Crumb catcher available for customers who use heavy breading
- Wand designed to prevent manual contact with hot surfaces
Fill Box
- Permanently mounted on external wall
- Permanently mounted fill box on Horizontal Bulk Oil Tank
- Incompatible new and used oil fittings to prevent cross-contamination
- Lockable fill box; entry only by authorized service agent
- Electronic automatic shut-off to prevent over-fill
To download complete specifications in .pdf format, click here.
Control Panel
- Flip "Add," to deliver fresh oil from the new oil storage compartment automatically to the fryer
- Flip "Dispose," and used oil from the fryers is transferred through the feeder lines to the waste oil storage compartment
- Flip "Filter," and oil is cycled through a high-efficiency filtering system
- A key switch allows management to control frequency of waste oil disposal
Outdoor Poly Tank
Specifications:
- Length: 62 ½ inches
- Width: 44 ½ inches
- Height: 51 ¼ inches
- Includes 2" skid attached to bottom
- Fill box door will stick up additional 3" when open
- Vessel Material:
- Oil Tanks: Food-Grade Polyethylene
- Enclosure: Aluminum - 120 VAC (maximum draw = 22 amp)
Net Storage Capacity:
973 lbs. fresh oil, 823 lbs. waste oil (823+150=973 including 150 lbs. of residual oil when tank is emptied)
Gross Weight of Oil Tanks:
- 1100 lbs. fresh oil tank
- 1100 lbs. waste oil tank
Enclosure weight:
Approximately 500 lbs.
Features:
- Overfill switch provided on both tanks
- Enclosure is electrically heated
- Fresh oil tank provided with remote level gauge that reads in "Pounds of Oil" inside restaurant
- Space inside enclosure for locating supporting equipment
- Clean oil tank certified by NSF to ANSI/NSF Standard 4 Component
- Certified to UL499
To download complete tank specifications in .pdf format, click here.
